Advanced Energy Saving Durable Distribution Transformer for Commercial Facilities

• Customization: Available
• Application: Power, Electronic, Instrument, Lighting, Rectifier, Audio
• Phase: Three
• Model NO.: Oil Immersed Transformer
• Core: Core-type Transformer
• Cooling Method: Oil-immersed Type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO, CE
• Usage: Power Transformer, Distribution Transformer
• Frequency Characteristics: Low Frequency
• Shape of Core: Ring
• Frequency: 50Hz
• Standard: IEC60076
• Rated Capacity: 30kVA~2500kVA
• Model Number: S11-M
• Transport Package: Export Standard Wooden Case
• Specification: Customized
• Trademark: KaiBian
• Origin: China

Product Description

S11 Hermetically Sealed Oil-Immersed Distribution Transformer With Dual-Winding Off- Circuit-Tap-Changing

STRUCTURE FEATURES
Iron core
The core is made of cold rolled silicon steel sheet with high magnetic conductivity grain orientation. The iron core is a core type iron core with full inclined joints. The iron core column is a circular section of multi-level steps, and the iron yoke and the iron core are equal sections.

Winding
The winding adopts corrugated oil duct, no paint dipping process, and binding with tightening belt; The windings are concentric coils; The high-voltage winding has a tap corresponding to the tap voltage requirements, which is led to the tap switch. The switch is installed on the box cover, and the tap voltage can be changed only after the power supply is cut off.

Safety protection device
---Transformers in all capacity sections are equipped with pressure relief valves
---Gas relay with alarm and trip terminals can be installed according to user requirements.

Oil temperature measuring device
---All transformers are equipped with tube sockets of glass thermometer, which are set at the top of the oil tank and extend into the oil for 120 ± 10mm
---10002000kva transformer is equipped with outdoor signal thermometer.

Transformer oil tank
---The transformer oil tank is composed of corrugated wall, and the surface is sprayed with dust and the paint film is firm. Corrugated heat sink not only has cooling function, but also has "breathing" function. The elasticity of corrugated heat sink can compensate for the change of transformer oil volume caused by temperature rise and fall.
Therefore, the fully sealed transformer has no oil conservator, which reduces the overall height of the transformer
---When the transformer is sealed in the vacuum, the moisture is not completely removed. It can effectively prevent oxygen and moisture from invading the transformer, resulting in the decline of transformer insulation performance and the aging of transformer oil, and improve the reliability of transformer operation.

Working conditions
---The installation height shall not exceed 1000m above sea level
---Ambient temperature - 40 ºC ~ 40 ºC
 

Rated capacity	Voltage combination			Group conncetion	Loss(kW )		No-load current	Short-circuit impedance	Weight(kg )
(kVA)	HV(kV)	High-voltage tapping range	LV(kV)	Symbol	No-load	On-load	(% )	(% )	Oil weight	Gross weight
30	6 6.3 10 10.5 11	±5%	0.4	Dyn11 Yzn11 YynO	0.13	0.63/0.60	2.3	4.0	75	295
50					0.17	0.91/0.87	2.0		88	395
63					0.20	1.09/1.04	1.9		95	420
80					0.25	1.31/1.25	1.9		103	480
100					0.29	1.58/1.50	1.8		115	540
125					0.34	1.89/1.80	1.7		130	645
160					0.40	2.31/2.20	1.6		145	740
200					0.48	2.73/2.60	1.5		175	885
250					0.56	3.20/3.05	1.4		195	1010
315					0.67	3.83/3.65	1.4		230	1205
400					0.80	4.52/4.30	1.3		255	1375
500					0.96	5.41/5.15	1.2		285	1620
630				Dyn11 YynO	1.20	6.20	1.1	4.5	350	1960
800					1.40	7.50	1.0		405	2310
1000					1.70	10.30	1.0		490	2690
1250					1.95	12.00	0.9		550	3315
1600					2.40	14.50	0.8		625	3985

 

 

Zhejiang Kaibian Electric Technology Co., Ltd. was established in June 2018, with a production area of approximately 10.000 sauare meters and an annual sales volume exceeding 100 milion RiB. We are a professional manufacturer specializing in the electrical industry, integrating production, sales, and service. Our main products include ring main units, compact substations, pad-mounted transformers, cable cabinets, energy metering boxes, and pole-mounted circuit breakers.Q:Are you a trading company or manufacturer ?
A: We are a professional factory in the field AC/DC power supply, uninter-ruptible power supply.We warmly welcome your visit.

Q: Do you accept customized serveice ?
A: We offer OEM/ODM service , can print your logo on product .our professional technical and quotation team can provice a satisfied project according to your drawing and parameters.

Q: What is your MoQ?
A: Our MoQ is l piece.

Q: How long is your delivery lead time ?
A: Generally, the delivery time is between 7-30 days after receiving payment from the customer.
Accurate information depends on the product and quantity, and we can further communicate on this.

Q: How do you solve quality problems?
A: Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make a satisfied soluton within 2 days .

Q: What is your payment terms ?
A:30%T/T in adcance,70% before shipment . West union , L/C are also acceptable.

Q:How long is your warranty period?
A: We provide customers with a 2-year warranty and a 1-year warranty.

Q: Do you have after-sales service?
A:Yes,we have an after-sales service team.